LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2016 >> SRX Performance, AWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 3.0L (LFW) Or 3.6L (LFX) - Repair Instructions - Off Vehicle >> Repair Instructions - Off Vehicle >> Crankshaft and Bearing Removal >> Crankshaft Removal

Crankshaft Removal

    Fig 1: Crankshaft Main Bearing Cap Side Bolts
    GM902789Courtesy of GENERAL MOTORS COMPANY
  1. Remove the crankshaft bearing cap side bolts.
  2. Remove the crankshaft bearing cap outer bolts.
  3. Remove the crankshaft bearing cap inner bolts.
    4. Fig 2: Crankshaft Main Bearing Caps
    GM1905889Courtesy of GENERAL MOTORS COMPANY
  4. Remove the crankshaft bearing caps using the GE 6125-1B  adapter (1) and EN 49102  remover (2).
    5. Fig 3: Crankshaft
    GM1866875Courtesy of GENERAL MOTORS COMPANY
  5. Using two hands, lift the crankshaft straight up from the engine block.
  6. Place the crankshaft in a secure place.
    7. Fig 4: Crankshaft Sprocket Drive Pin
    GM1864436Courtesy of GENERAL MOTORS COMPANY
  7. Remove the crankshaft key from the nose of the crankshaft, if damaged.
scientia non olet · About LEMON Manuals