LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2016 >> SRX Performance, AWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 3.0L (LFW) Or 3.6L (LFX) - Repair Instructions - Off Vehicle >> Repair Instructions - Off Vehicle >> Camshaft Position Actuator Removal - Right Side Intake

Camshaft Position Actuator Removal - Right Side Intake

    Fig 1: Intake Camshaft Position Actuator & Bolt
    GM1852277Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Torque Reaction Against Timing Drive Chain Caution .

  1. Use an open wrench on the hex cast into the camshaft in order to prevent engine rotation when loosening the camshaft position actuator bolt.
  2. Remove the right intake camshaft position actuator bolt (1).
  3. Remove the right intake camshaft position actuator (2).
  4. Remove the camshaft thrust washer if applicable (3).
scientia non olet · About LEMON Manuals