Driver Knee Bolster Panel Replacement

Fig 1: Driver Knee Bolster Panel

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure  Instrument Panel Side Trim Panel Replacement
1	Instrument Panel Knee Bolster Bolt (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten  2.5 N.m (22 lb in)
2	Instrument Panel Knee Bolster Clip Procedure  Using a suitable pry tool, remove the clip.
3	Instrument Panel Knee Bolster Procedure  Grasp the instrument panel knee bolster panel and pull rearward releasing the retainer clips securing the instrument panel knee bolster to the instrument panel assembly.