LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2016 >> SRX Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 3.0L (LFW) Or 3.6L (LFX) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Oil Pump Suction Pipe and Screen Assembly Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Oil Suction Tube Seal & Oil Suction Tube
    GM1318091Courtesy of GENERAL MOTORS COMPANY
  1. Install a NEW oil suction tube seal onto the oil suction tube. DO NOT reuse the old oil suction tube seal.
    2. Fig 2: Oil Suction Pipe
    GM1210965Courtesy of GENERAL MOTORS COMPANY
  2. Install the oil suction pipe.
    3. CAUTION:

    Refer to Fastener Caution .

  3. Install the oil suction pipe bolts and tighten to 10 N.m (89 lb in).
    4. Fig 3: Oil Pan Scraper And Bolts
    GM1210963Courtesy of GENERAL MOTORS COMPANY
  4. Install the oil pan scraper.
  5. Install the oil pan scraper bolts and tighten to 10 N.m (89 lb in).
  6. Install the oil pan. Refer to Oil Pan Replacement .
scientia non olet · About LEMON Manuals