LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2016 >> SRX Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 3.0L (LFW) Or 3.6L (LFX) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Oil Level Indicator Tube Replacement (LF1, LFW, or LFX) >> Installation Procedure

Installation Procedure

    Fig 1: Oil Level Indicator Tube O-Ring
    GM1583980Courtesy of GENERAL MOTORS COMPANY
  1. Install a NEW O-ring on the oil level indicator tube.
    2. Fig 2: Oil Level Indicator Tube
    GM2213526Courtesy of GENERAL MOTORS COMPANY
  2. Install the oil level indicator and tube (2) by sliding the tube down through the lower crankcase hole.
    3. CAUTION:

    Refer to Fastener Caution .

  3. Install the oil level indicator tube bracket bolt (1) and tighten to 10 N.m (89 lb in).
  4. Install the intake manifold cover. Refer to Intake Manifold Cover Replacement .
scientia non olet · About LEMON Manuals