Engine Oil Pressure Sensor and/or Switch Replacement (LF1, LFW or LFX)

Fig 1: Engine Oil Pressure Sensor And/Or Switch (LF1, LFW or LFX)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Engine Oil Pressure Sensor and/or Switch CAUTION: Refer to Component Fastener Tightening Caution . Procedure Disconnect the oil pressure sensor electrical connector. Transfer components as necessary. Tighten 20 N.m (15 lb ft) Special Tools EN-41712 Oil Pressure Switch Socket For equivalent regional tools, refer to Special Tools .

Callout

Component Name

Preliminary Procedure
Remove the generator. Refer to Generator Replacement .

Engine Oil Pressure Sensor and/or Switch

CAUTION:

Procedure

Tighten
20 N.m (15 lb ft)
Special Tools
EN-41712 Oil Pressure Switch Socket
For equivalent regional tools, refer to Special Tools .