LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2016 >> SRX Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 3.0L (LFW) Or 3.6L (LFX) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Engine Oil Level Sensor and/or Switch Replacement >> Removal Procedure

Removal Procedure

  1. Remove the oil pan. Refer to Oil Pan Replacement .
    2. Fig 1: Oil Pan Scraper
    GM2736535Courtesy of GENERAL MOTORS COMPANY
  2. Remove the oil pan scraper bolts (2).
  3. Remove the oil pan scraper (1).
    4. Fig 2: Oil Suction Pipe Bolts
    GM2736534Courtesy of GENERAL MOTORS COMPANY
  4. Remove the oil suction pipe bolts (1).
  5. Remove the oil suction pipe (2).
    6. Fig 3: Oil Suction Pipe Seal
    GM2736537Courtesy of GENERAL MOTORS COMPANY
  6. Remove the oil suction pipe seal (1) and discard.
    7. Fig 4: Engine Oil Level Switch, Seal & Clip
    GM2736533Courtesy of GENERAL MOTORS COMPANY
  7. Remove the engine oil level switch clip (4)
  8. Remove the engine oil level switch bolts (2).
  9. Remove the engine oil level switch (3).
  10. Remove the engine oil level switch seal (1).
scientia non olet · About LEMON Manuals