LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2016 >> SRX Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 3.0L (LFW) Or 3.6L (LFX) - Repair Instructions - Off Vehicle >> Repair Instructions - Off Vehicle >> Intake Manifold Removal (LF1, LFW or LFX)

Intake Manifold Removal (LF1, LFW or LFX)

    Fig 1: Positive Crankcase Ventilation (PCV) Tube Assembly
    GM2201943Courtesy of GENERAL MOTORS COMPANY
  1. Disconnect and remove the positive crankcase ventilation (PCV) tube (1) from the intake manifold and right camshaft cover.
    2. Fig 2: Upper Intake Manifold And EVAP Solenoid
    GM2201953Courtesy of GENERAL MOTORS COMPANY
  2. Remove the evaporative (EVAP) hose from the intake manifold and EVAP solenoid.
    3. Fig 3: Fuel Pump Cover & Bolt
    GM2201957Courtesy of GENERAL MOTORS COMPANY
  3. Remove the engine rear noise shield bolt (1).
  4. Remove the engine rear noise shield (2).
    5. Fig 4: Intake Manifold Assembly
    GM2201963Courtesy of GENERAL MOTORS COMPANY
  5. Remove the intake manifold bolts (1).
  6. Remove the intake manifold assembly (2).
    7. Fig 5: Intake Manifold Gasket
    GM2202023Courtesy of GENERAL MOTORS COMPANY
  7. Remove and discard the intake manifold gasket (1).
scientia non olet · About LEMON Manuals