Crankshaft Rear Oil Seal and Housing Removal

Fig 1: Crankshaft Rear Oil Seal and Housing

GM4597222

Courtesy of GENERAL MOTORS COMPANY

Callout

Component Name

1

Crankshaft Rear Oil Seal Housing Bolt

2

Crankshaft Rear Oil Seal Housing

Procedure

Ensure proper use of room temperature vulcanizing (RTV) sealant. Use of Room Temperature Vulcanizing (RTV) and Anaerobic Sealant
Use the pry points located at the edge of the crankshaft rear oil seal housing to separate the RTV sealant.
Remove and DISCARD the crankshaft rear oil seal housing.