Rear Bumper Fascia Replacement

Fig 1: Rear Bumper Fascia, Support & Retainers

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the tail lamps. Refer to Tail Lamp Replacement . Remove the rear screws from the wheelhouse liner. Refer to Rear Wheelhouse Liner Replacement .
1	Rear Fascia Lower Push-In Retainer (Qty: 4)
2	Rear Fascia Support Procedure Reposition the lower liftgate weatherstrip to access the center bracket. Insert a small flat-bladed tool into the fascia center bracket and depress the snaps one at a time and pull on the fascia working from one side to the other to remove the fascia from the rear fascia brackets.
3	Rear Fascia Procedure Disconnect the electrical connectors.