LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2016 >> CTS Base, RWD >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Engine Controls And Fuel - 2.0L (LTG) - Repair Instructions >> Repair Instructions >> Charge Air Cooler Outlet Air Tube Replacement >> Installation Procedure

Installation Procedure

  1. Install the charge air cooler outlet air tube (2) to the vehicle.
    Fig 1: Charge Air Cooler Outlet Air Tube And Charge Air Cooler
    GM2869959Courtesy of GENERAL MOTORS COMPANY
  2. Connect the charge air cooler outlet air tube (2) to the charge air cooler (3) and engage the retaining clip (1).
  3. Install the front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement (Non V-Series) and Front Wheelhouse Liner Replacement (V-Series)
  4. Install the charge air cooler outlet air tube (1) to the throttle body (2) while rotating the collar clockwise.
    NOTE: The charge air cooler is equipped with a locking collar. Rotate the charge air cooler collar clockwise to lock the charge air cooler.
  5. Connect the intake air pressure and temperature sensor electrical connector.
scientia non olet · About LEMON Manuals