Hood Strut Replacement (CTS-V)

Fig 1: Hood Strut (CTS-V)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Hood Strut Assembly WARNING: When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury. CAUTION: Apply pressure only at the end of the liftgate/hood assist rod that you are removing or attaching. Do NOT apply pressure to the middle of the rod because damage or bending will result. Procedure Remove the metal clip at the ends of the hood strut, then pull away from the stud.

Callout

Component Name

Hood Strut Assembly

WARNING: When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.

CAUTION: Apply pressure only at the end of the liftgate/hood assist rod that you are removing or attaching. Do NOT apply pressure to the middle of the rod because damage or bending will result.

Procedure
Remove the metal clip at the ends of the hood strut, then pull away from the stud.