Steering Column Shroud Replacement (Without Key Release Lever Knob)
| Callout | Component Name |
|---|---|
| 1 | Steering Column Shroud Bolt (Qty: 4)
CAUTION:
Refer to Fastener Caution . TIP: When removing or replacing one side of the steering column shroud, remove all four steering column shroud bolts to allow for the slack needed to separate the pieces. Tighten 3 N.m (27 lb in) |
| 2 | Steering Column Upper Shroud TIP: Detach the steering column housing cover from the steering column upper shroud before attempting removal. |
| 3 | Steering Column Shroud (Qty: 2) TIP: Replace each piece of the steering column shroud as needed. |