Supercharger Air Outlet Pressure Sensor Replacement

Fig 1: Identifying Supercharger Air Outlet Pressure Sensor

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure  Remove the front manifold cover. Refer to Intake Manifold Cover Replacement - Front .
1	Super Charger Air Pressure Sensor Bolt CAUTION: Refer to Fastener Caution . Tighten  10 N.m (89 lb in)
2	Super Charger Air Outlet Pressure Sensor Procedure  Disconnect the super charger pressure sensor harness connector. TIP:  Always install the NEW O-ring provided with the super charger pressure sensor.