Driver or Passenger Seat Recliner Handle Bezel Bracket Replacement (W2E)

Fig 1: Identifying Driver Or Passenger Seat Recliner Handle Bezel Bracket (W2E)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the front seat finish cover. Refer to Driver or Passenger Seat Outer Adjuster Front Finish Cover Replacement (W2E) . Remove the front seat adjuster switch bezel. Refer to Front Seat Adjuster Switch Bezel Replacement (W2E) . Remove the front seat inner adjuster rear finish cover. Refer to Driver or Passenger Seat Inner Adjuster Rear Finish Cover Replacement (W2E) .
1	Front Seat Recliner Handle Bezel Bracket Screw (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten 3 N.m (27 lb in)
2	Front Seat Recliner Handle Bezel Bracket

Callout

Component Name

Preliminary Procedure

Front Seat Recliner Handle Bezel Bracket Screw (Qty: 4)

CAUTION:

Tighten
3 N.m (27 lb in)

Front Seat Recliner Handle Bezel Bracket