Sunshade Replacement

Fig 1: Identifying Sunshade Assembly

GM1962800

Courtesy of GENERAL MOTORS COMPANY

Callout

Component Name

Preliminary Procedures

Remove windshield garnish molding. Refer to Windshield Side Garnish Molding Replacement .
Lower the front of headliner to access the sunshade electrical connector, if necessary. Refer to Headlining Trim Panel Replacement (Coupe) .

1

Sunshade Screw (Qty: 3)

CAUTION:

Refer to Fastener Caution .

Procedure
The closeout snaps into place.
Tighten
3 N.m (27 lb in)

2

Sunshade Assembly

Procedure

Squeeze the tabs at the base of the sunshade assembly to remove from the headliner.
Disconnect the electrical connector.