Front Floor Console Applique Replacement

Fig 1: Front Floor Console Applique

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Front Floor Console Applique CAUTION: To prevent component damage, DO NOT use metal tools to remove the trim. CAUTION: Be sure to follow the service procedure when removing the trim panel. Failure to follow service procedure may cause damage to the trim panel. Procedure Use a flat bladed plastic trim tool in order to release the three retaining clips securing the front floor console applique to the console assembly. Insert the flat bladed plastic trim tool approximately one inch from the lower rear corner along the lower edge of the trim releasing the first retainer clip, then work forward toward the front of the vehicle releasing the remaining retainer clips.

Callout

Component Name

Front Floor Console Applique

CAUTION:

To prevent component damage, DO NOT use metal tools to remove the trim.

CAUTION:

Be sure to follow the service procedure when removing the trim panel. Failure to follow service procedure may cause damage to the trim panel.

Procedure

Use a flat bladed plastic trim tool in order to release the three retaining clips securing the front floor console applique to the console assembly.
Insert the flat bladed plastic trim tool approximately one inch from the lower rear corner along the lower edge of the trim releasing the first retainer clip, then work forward toward the front of the vehicle releasing the remaining retainer clips.