Driver or Passenger Seat Recliner Handle Bezel Bracket Replacement (AQ9)

Fig 1: Driver Seat and Passenger Seat Recliner Handle Bezel Bracket

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the front seat. Refer to Front Seat Removal and Installation - Bucket (AQ9) . Remove the front seat adjuster switch bezel. Refer to Front Seat Adjuster Switch Bezel Replacement (AQ9) . Remove the front seat inner adjuster rear finish cover. Refer to Driver or Passenger Seat Inner Adjuster Rear Finish Cover Replacement (AQ9) .
1	Front Seat Recliner Handle Bezel Bracket Screw (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten 3 N.m (27 lb in)
2	Front Seat Recliner Handle Bezel Bracket

Callout

Component Name

Preliminary Procedure

Front Seat Recliner Handle Bezel Bracket Screw (Qty: 4)

CAUTION:

Tighten
3 N.m (27 lb in)

Front Seat Recliner Handle Bezel Bracket