Air Inlet Grille Panel Side Seal Replacement

Fig 1: Air Inlet Grille Panel Side Seal

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Open and support hood in order to access the air inlet grille panel side seal.
1	Air Inlet Grille Panel Side Seal Procedure Release the tabs securing the air inlet grille panel side seal to the rear upper fender flange. Disengage the rearward edge of the seal from under the top edge of the fender flange.

Callout

Component Name

Preliminary Procedure
Open and support hood in order to access the air inlet grille panel side seal.

Air Inlet Grille Panel Side Seal

Procedure

Release the tabs securing the air inlet grille panel side seal to the rear upper fender flange.
Disengage the rearward edge of the seal from under the top edge of the fender flange.