Driver or Passenger Seat Back Cushion Frame Replacement (AQ9)

Fig 1: Front Seat Back Frame

GM1969556

Courtesy of GENERAL MOTORS COMPANY

Callout

Component Name

Preliminary Procedure

Remove the front seat. Refer to Front Seat Removal and Installation - Bucket (AQ9) .
Remove the front seat back cushion cover and pad. Refer to Front Seat Back Cushion Cover and Cushion Pad Replacement (AQ9) .

1

Front Seat Back Cushion Frame Bolt (Qty: 4)

CAUTION:

Refer to Fastener Caution .

Tighten
50 N.m (37 lb ft)

2

Front Seat Back Cushion Frame

Procedure

Disconnect electrical connectors as needed.
Remove the inflatable restraint side impact module. Refer to Front Seat Outboard Seat Back Airbag Replacement (AQ9) .
If replacing with a new front seat back frame, transfer components as necessary.