X915 License Lamp Harness to Body Harness
|
|
|
Connector Part Information
- Harness Type: License Lamp
- OEM Connector: AIT2PB-10P-2AK
- Service Connector: Service by Harness Assembly- See Part Catalog
- Description: 10-Way F 0.64 Kaizen Series (BK)
|
Connector Part Information
- Harness Type: Body
- OEM Connector: AIT2WSB-10A-2AK
- Service Connector: 19177677
- Description: 10-Way M 0.64 Kaizen Series (BK)
|
Terminal Part Information
| Terminal Type ID |
Terminated Lead |
Diagnostic Test Probe |
Terminal Removal Tool |
Service Terminal |
Tray Name |
Core Crimp |
Insulation Crimp |
| I |
Not Required |
J-35616-64B (LT BU) |
Not Required |
Not Required |
Not Required |
Not Required |
Not Required |
| II |
19299859 |
J-35616-65B (LT BU) |
J-38125-215A |
SAITW-A03T-064 |
Delphi 20 |
J |
J |
| Pin |
Size |
Color |
Circuit |
Terminal Type ID |
Option |
Function |
Pin |
Size |
Color |
Circuit |
Terminal Type ID |
Option |
| 1 |
0.5 |
BK |
2450 |
I |
- |
Ground |
1 |
0.5 |
BK |
2450 |
II |
- |
| 2 |
0.5 |
GN/YE |
6846 |
I |
- |
Rear License Lamp Control |
2 |
0.5 |
GN/YE |
6846 |
II |
- |
| 3 |
0.5 |
GN/WH |
24 |
I |
UVC |
Backup Lamp Control |
3 |
0.5 |
GN/WH |
24 |
II |
UVC |
| 4 |
0.35 |
VT/GN |
1339 |
I |
UVC |
Run/Crank Ignition 1 Voltage |
4 |
0.35 |
VT/GN |
1339 |
II |
UVC |
| 5 |
0.35 |
BK |
2450 |
I |
UVC |
Ground |
5 |
0.35 |
BK |
2450 |
II |
UVC |
| 6 |
0.5 |
YE/BU |
5797 |
I |
- |
Rear Closure Handle Switch Open Signal |
6 |
0.35 |
YE/BU |
5797 |
II |
- |
| 7 |
- |
- |
- |
- |
- |
Not Occupied |
7 |
- |
- |
- |
- |
- |
| 8 |
0.35 |
WH/BU |
6973 |
I |
UVC |
Camera Signal 2 |
8 |
0.35 |
WH/BU |
6973 |
II |
UVC |
| 9 |
0.35 |
GY/YE |
6972 |
I |
UVC |
Camera Signal 2 + |
9 |
0.35 |
GY/YE |
6972 |
II |
UVC |
| 10 |
0.35 |
BARE |
6974 |
I |
UVC |
Camera Low Reference |
10 |
0.35 |
BARE |
6974 |
II |
UVC |