LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2014 >> XTS Livery >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Engine Controls And Fuel - 3.6L (LFX LF3) - Repair Instructions >> Repair Instructions >> Ignition Coil Replacement - Bank 2 (LFX) >> Installation Procedure

Installation Procedure

    Fig 1: Ignition Coil & Bolts - Bank 2
    GM2754750Courtesy of GENERAL MOTORS COMPANY
  1. Install the ignition coil(s) (2).
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the ignition coil bolt(s) (1).

    Tighten 

    Tighten the bolt(s) to 10 N.m (89 lb in).

    3. Fig 2: Engine Wiring Harness Ignition Coil Electrical Connectors - Bank 2
    GM2754744Courtesy of GENERAL MOTORS COMPANY
  3. Connect the engine wiring harness electrical connector(s) (5) to the ignition coil(s) (4).
  4. Install the intake manifold cover. Refer to Intake Manifold Cover Replacement (LFX) .
scientia non olet · About LEMON Manuals