LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2014 >> XTS Livery >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Engine Controls And Fuel - 3.6L (LFX LF3) - Repair Instructions >> Repair Instructions >> Charge Air Bypass Valve Vacuum Tank Tube Replacement (Left Cylinder Bank LF3) >> Installation Procedure

Installation Procedure

    Fig 1: Charge Air Bypass Valve Vacuum Tank Tube Bundle Left Cylinder Bank Clamps
    GM3336542Courtesy of GENERAL MOTORS COMPANY
  1. Connect the retainers and tie straps to the charge air bypass valve vacuum tank tube bundle left cylinder bank (3) and install to vehicle.
  2. Connect the charge air bypass valve vacuum tank tube bundle left cylinder bank quick connect fitting (2) to the turbocharger wastegate actuator vacuum tank. Refer to Plastic Collar Quick Connect Fitting Service .
  3. Connect the charge air bypass valve vacuum tank tube bundle left cylinder bank clamps (1) to the turbocharger wastegate actuator vacuum tank.
    4. Fig 2: Charge Air Bypass Valve Vacuum Tank Tube Bundle Left Cylinder Bank Quick Connect Fittings
    GM3336540Courtesy of GENERAL MOTORS COMPANY
  4. Connect the charge air bypass valve vacuum tank tube bundle left cylinder bank (1) to the engine. Refer to Plastic Collar Quick Connect Fitting Service .
  5. Connect the retainers and tie straps to the charge air bypass valve vacuum tank tube bundle left cylinder bank (2).
  6. Install the intake manifold cover. Refer to Intake Manifold Cover Replacement (LF3) .
  7. Install the front compartment front sight shield. Refer to Front Compartment Front Sight Shield Replacement .
scientia non olet · About LEMON Manuals