Front Fender Replacement

Fig 1: Front Fender & Mounting Components

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement . Remove the headlamp. Refer to Headlamp Replacement . Remove the rocker panel. Refer to Rocker Panel Molding Replacement . Remove the front wheelhouse front liner. Refer to Front Wheelhouse Front Liner Replacement . Remove the air inlet grille extension panel. Refer to Air Inlet Grille Panel Extension Replacement . Remove the front fender upper rear molding. Refer to Front Fender Upper Rear Molding Replacement . Remove the front compartment side sight shield. Refer to Front Compartment Side Sight Shield Replacement .
1	Front Fender Bolt CAUTION: Refer to Fastener Caution . Tighten 9 (80 lb in)
2	Front Fender Bolt Tighten 9 (80 lb in)
3	Front Fender Nut Tighten 9 (80 lb in)
4	Front Fender Bolt (Qty: 5) Tighten 9 (80 lb in)
5	Front Fender Procedure Transfer parts as needed.