Front Seat Back Cushion Finish Panel Replacement (with UWG)

Fig 1: View Of Seat Back Cushion Finish Panel (With UWG)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the driver or passenger video display. Refer to Video Display Replacement .
1	Front Seat Back Cushion Finish Panel Screw (Qty: 2) CAUTION: Refer to Fastener Caution . Procedure Detach the seat back cushion cover bottom two bungie clips from the crossbar. TIP: Pull the seat back cushion cover bottom back to gain access to the panel screws that attach the panel to the lumbar support bracket. Tighten 4 N.m (35 lb in)
2	Front Seat Back Cushion Finish Panel Procedure Pull the panel downward first to disengage the upper retainers. Move the finish panel and side clips to one side to disengage the panel from the seat frame.

Callout

Component Name

Preliminary Procedure
Remove the driver or passenger video display. Refer to Video Display Replacement .

Front Seat Back Cushion Finish Panel Screw (Qty: 2)

CAUTION:

Refer to Fastener Caution .

Procedure
Detach the seat back cushion cover bottom two bungie clips from the crossbar.
TIP: Pull the seat back cushion cover bottom back to gain access to the panel screws that attach the panel to the lumbar support bracket.
Tighten
4 N.m (35 lb in)

Front Seat Back Cushion Finish Panel

Procedure

Pull the panel downward first to disengage the upper retainers.
Move the finish panel and side clips to one side to disengage the panel from the seat frame.