Driver or Passenger Seat Cushion Frame Replacement

Fig 1: Identifying Driver Or Passenger Seat Cushion Frame & Bolts

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
WARNING: Refer to SIR Warning . Preliminary Procedure Remove the front seat cushion cover and pad. Refer to Front Seat Cushion Cover and Pad Replacement . Preload test the inflatable restraint passenger presence system whenever the seat cushion or any component of the passenger presence system is removed. Refer to Control Module References .
1	Driver or Passenger Seat Back Cushion Frame Bolt (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten 35 N.m (26 lb ft)
2	Driver or Passenger Seat Cushion Frame Procedure Disconnect electrical connectors as needed. When replacing the front passenger seat cushion, you must also replace the inflatable restraint passenger presence system. Refer to Airbag Front Passenger Presence Sensor Replacement . If replacing with a new front seat cushion, transfer components as necessary.

Callout

Component Name

WARNING:

Preliminary Procedure

Remove the front seat cushion cover and pad. Refer to Front Seat Cushion Cover and Pad Replacement .
Preload test the inflatable restraint passenger presence system whenever the seat cushion or any component of the passenger presence system is removed. Refer to Control Module References .

Driver or Passenger Seat Back Cushion Frame Bolt (Qty: 4)

CAUTION:

Tighten
35 N.m (26 lb ft)

Driver or Passenger Seat Cushion Frame

Procedure

Disconnect electrical connectors as needed.
When replacing the front passenger seat cushion, you must also replace the inflatable restraint passenger presence system. Refer to Airbag Front Passenger Presence Sensor Replacement .
If replacing with a new front seat cushion, transfer components as necessary.