X902 License Lamp Harness to Liftgate Harness

Connector Part Information Harness Type: License Lamp OEM Connector: 15466054 Service Connector: Service by Harness - See Part Catalog Description: 16-Way F Kaizen 64 Series (BN)	Connector Part Information Harness Type: Liftgate OEM Connector: 13592732 Service Connector: Service by Harness - See Part Catalog Description: 16-Way M YESC Kaizen 64 Series (BN)

Terminal Part Information

Terminal Type ID	Terminated Lead	Diagnostic Test Probe	Terminal Removal Tool	Service Terminal	Tray	Core Crimp	Insulation Crimp
I	Not Available	J-35616-64B (L-BU)	Not Available	Not Available	Not Available	Not Available	Not Available
II	Not Available	No Tool Required	Not Available	Not Available	Not Available	Not Available	Not Available
III	Not Available	J-35616-65B (L-BU)	Not Available	Not Available	Not Available	Not Available	Not Available

X902 License Lamp Harness to Liftgate Harness

Pin	Size	Color	Circuit	Terminal Type ID	Option	Function	Pin	Size	Color	Circuit	Terminal Type ID	Option
1	0.5	L-GN/RD	6846	I	-	Rear License Lamp Supply Voltage	1	0.5	D-GN/YE	6846	III	-
2	0.35	VT/L-GN	1339	I	UVC	Run/Crank Ignition 1 Voltage	2	0.35	VT/D-GN	1339	III	UVC
3	0.35	L-GN/WH	24	I	UVC	Backup Lamp Supply Voltage	3	0.35	D-GN/WH	24	III	UVC
4-8	-	-	-	-	-	Not Occupied	4-8	-	-	-	-	-
9	0.5	BK	1350	I	-	Ground	9	0.35	BK	1350	III	-
10	0.35	BARE	6974	I	UVC	Camera Drain Wire	10	0.35	BARE	6974	III	UVC
11	0.35	GY/YE	6972	I	UVC	Camera Signal #2 +	11	0.35	GY/YE	6972	III	UVC
12	0.35	WH/D-BU	6973	I	UVC	Camera Signal #2	12	0.35	WH/D-BU	6973	III	UVC
13	0.35	BK/WH	2151	I	UVC	Signal Ground	13	0.35	BK/WH	2151	III	UVC
14	-	-	-	-	-	Not Occupied	14	-	-	-	-	-
15	0.5	YE	5801	II	-	Lift Gate Object Sensor Low Reference	15	0.35 0.5	BK BK/VT	1350 5801	III	without TB5 TB5
16	0.5	D-BU	5797	II	-	Rear Closure Handle Switch Open Signal	16	0.5	YE/D-BU	5797	III	-