Front Side Door Window Belt Reveal Molding Replacement

Fig 1: View Of Front Side Door Window Belt Outer Sealing Strip

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the front side door trim panel. Refer to Front Side Door Trim Replacement Remove the outside rearview mirror. Refer to Outside Rearview Mirror Replacement
1	Front Side Door Window Belt Reveal Molding Screw CAUTION: Refer to Fastener Caution TIP: The screw is located in the lower rear of the door frame. Tighten 1.5 N.m (13 lb in)
2	Front Side Door Window Belt Reveal Molding Procedures Remove the belt reveal molding by lifting up on the front of the seal and working rearward. When re-installing the belt reveal molding, align the fastener with the locating hole in the door frame.

Callout

Component Name

Preliminary Procedure

Remove the front side door trim panel. Refer to Front Side Door Trim Replacement
Remove the outside rearview mirror. Refer to Outside Rearview Mirror Replacement

Front Side Door Window Belt Reveal Molding Screw

CAUTION:

TIP: The screw is located in the lower rear of the door frame.
Tighten
1.5 N.m (13 lb in)

Front Side Door Window Belt Reveal Molding

Procedures

Remove the belt reveal molding by lifting up on the front of the seal and working rearward.
When re-installing the belt reveal molding, align the fastener with the locating hole in the door frame.