Fastener Tightening Specifications
WARNING: This page is about a different car, the 2014 GMC Yukon XL 1500, 2014 GMC Yukon, 2014 Chevrolet Tahoe, and 2014 Chevrolet Suburban 1500. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Transfer Case Actuator Shaft Position Sensor Bolt/Screw | 9 N.m | 80 lb in |
| Transfer Case to Adapter Nuts | 50 N.m | 37 lb ft |
| Transfer Case Adapter to Transmission Bolts | 50 N.m | 37 lb ft |
| Transfer Case Adapter Bolt | 50 N.m | 37 lb ft |
| Transfer Case Half Bolts/Stud (Qty: 17) | 25 N.m | 18 lb ft |
| Transfer Case Vibration Dampener Nuts-Model Dependent | 22 N.m | 16 lb ft |
| Transfer case vibration Dampener-to-Rear Case Stud-Model Dependent | 22 N.m | 16 lb ft |
| Transfer Case Nut | 50 N.m | 37 lb ft |
| Transfer Case Oil Drain Plug | 18 N.m | 13 lb ft |
| Transfer Case Oil Fill Plug | 18 N.m | 13 lb ft |
| Transfer Case Shift Fork Shaft Guide Screw | 5 N.m | 44 lb in |
| Transfer Case 2/4 Wheel Drive Actuator Bolt/Screw | 18 N.m | 13 lb ft |
| Vehicle Speed Sensor Assembly | 17 N.m | 13 lb ft |