LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2014 >> Escalade Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Transfer Case - Mp 3023/3024-NQH) >> Repair Instructions - Off Vehicle >> Transfer Case Disassemble >> Transfer Case Rear Case Half Removal

Transfer Case Rear Case Half Removal

WARNING: This page is about a different car, the 2014 GMC Yukon XL 1500, 2014 GMC Yukon, 2014 Chevrolet Tahoe, and 2014 Chevrolet Suburban 1500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Transfer Case Halves, Bracket & Bolts
GM1849346Courtesy of GENERAL MOTORS COMPANY
Transfer Case Rear Case Half Removal

Callout Component Name
1 Transfer Case Bolts (Qty: 17)
2 Transfer Case Bracket
3 Transfer Case Rear Case Half
CAUTION:

Refer to Machined Surface Damage Caution .

NOTE:
  • Use opposing pry bars at casting bosses to spread the case.
  • Use snap ring pliers to release the transfer case rear output shaft outer retaining ring from the transfer case rear output shaft rear bearing assembly.
scientia non olet · About LEMON Manuals