LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2014 >> Escalade Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Transfer Case - Mp 3023/3024-NQH) >> Diagnostic Information and Procedures >> DTC C0569: System Configuration Error Calibration Not Learned >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2014 GMC Yukon XL 1500, 2014 GMC Yukon, 2014 Chevrolet Tahoe, and 2014 Chevrolet Suburban 1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Key ON, engine ON. Let engine run for at least 1 minute.
  2. Key OFF for at least 30 seconds to allow for the complete shutdown of the TCCM.
  3. Key ON, engine OFF.
  4. Verify that DTC C0387 is not set.
    • If DTC C0387 is set, diagnose it first.
  5. Verify that DTC C0569 is not set.
scientia non olet · About LEMON Manuals