LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2014 >> Escalade Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Transfer Case - Mp 3023/3024-NQH) >> Diagnostic Information and Procedures >> DTC B0790: Neutral Indicator >> Circuit/System Description

Circuit/System Description

WARNING: This page is about a different car, the 2014 GMC Yukon XL 1500, 2014 GMC Yukon, 2014 Chevrolet Tahoe, and 2014 Chevrolet Suburban 1500. However, it is still accessible from the selected car via links, so may be relevant.

The Neutral indicator circuit consists of a light emitting diode (LED) feed circuit, a LED and a LED control circuit. The Ignition 1 voltage circuit is the LED feed circuit and continuously supplies B+ to the Neutral LED. When the Neutral mode has been selected by the driver, the transfer case shift control module (TCCM) provides a ground through the Neutral indicator control circuit illuminating the LED.

The TCCM tests the Neutral indicator circuit for unexpected voltage by monitoring the B+ supplied by the BCM on the Ignition 1 voltage circuit by grounding the Neutral indicator control circuit for 2 seconds during the Bulb Test at key ON.

scientia non olet · About LEMON Manuals