Input Shaft Seal Installer Revisions
WARNING: This page is about a different car, the 2014 GMC Yukon XL 1500, 2014 GMC Yukon, 2014 Chevrolet Tahoe, and 2014 Chevrolet Suburban 1500. However, it is still accessible from the selected car via links, so may be relevant.
Beginning July 2013, a new input shaft seal installer has been identified for Magna transfer case applications (all model years and all RPOs). The new seal installer is identified as DT-50648-A Seal Installer (4). The DT-50648-A Seal Installer is to be used in place of J-42738 Seal Installer (3), as well as J-36183 Press Tube (1) and J- 36184 Press Tube Reducer (2). J-42738 Seal Installer is to be discontinued and no longer available.