Rear Quarter Trim Panel Replacement - Left Side (Standard Wheelbase w/o E61)

Fig 1: Rear Quarter Trim Panel - Left Side (Standard Wheelbase w/o E61)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Disable roof rail SIR system. Refer to SIR Disabling and Enabling . Remove third row seats. Refer to 3rd Row Seat Removal and Installation (Suburban/Yukon XL) , 3rd Row Seat Removal and Installation (Tahoe/Yukon/Escalade) . Remove rear opening garnish molding. Refer to Rear Door Upper Garnish Molding Replacement . Remove back rear corner upper garnish molding. Refer to Body Rear Corner Garnish Molding Replacement - Left Side (Without E61) . Remove rear side door sill plate. Refer to Rear Side Door Sill Trim Plate Replacement (Standard Wheelbase) . Remove body side lock pillar garnish molding. Refer to Body Lock Pillar Garnish Molding Replacement (Standard Wheelbase) .
1	Body Side Trim Panel Assembly TIP: Align the 4-way locator to the body side inner and then the 2-way locator to the body back opening.
2	Body Side Trim Panel Retainer (Qty: 9)

Callout

Component Name

Preliminary Procedures

Body Side Trim Panel Assembly
TIP: Align the 4-way locator to the body side inner and then the 2-way locator to the body back opening.

Body Side Trim Panel Retainer (Qty: 9)