Rear Quarter Trim Panel Replacement - Left Side (Extended Wheelbase w/o E61)

Fig 1: Rear Quarter Trim Panel - Left Side (Extended Wheelbase w/o E61)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Disable the roof rail SIR system. Refer to SIR Disabling and Enabling . Remove the third row seats. Refer to 3rd Row Seat Removal and Installation (Suburban/Yukon XL) , 3rd Row Seat Removal and Installation (Tahoe/Yukon/Escalade) . Remove the rear opening garnish molding. Refer to Rear Door Upper Garnish Molding Replacement . Remove the back rear corner upper garnish molding. Refer to Body Rear Corner Garnish Molding Replacement - Left Side (Without E61) . Remove the rear side door sill plate. Refer to Rear Side Door Sill Trim Plate Replacement (Extended Wheelbase) . Remove the body side lock pillar garnish molding. Refer to Body Lock Pillar Garnish Molding Replacement (Extended Wheelbase) .
1	Body Side Trim Panel Assembly TIP: Align the locators to the body side inner panel prior to engaging the retainers.
2	Body Side Trim Panel Retainer (Qty: 12)

Callout

Component Name

Preliminary Procedures

Body Side Trim Panel Assembly
TIP: Align the locators to the body side inner panel prior to engaging the retainers.

Body Side Trim Panel Retainer (Qty: 12)