Cargo Box Front Cover, Center Cover, and Rear Cover Replacement
Courtesy of GENERAL MOTORS COMPANY Cargo Box Front Cover, Center Cover, and Rear Cover Replacement
| Callout |
Component Name |
| 1 |
Rear Cargo Box Cover
- Open the endgate to access the latches.
- Remove the rear cargo panel by pulling the left and right cargo panel latches, located on the bottom of each cargo panel, forward to unlock the cargo panel latches.
- Lift the cargo panel up and then out from the side rails.
- The left latch must be locked in place before the right latch. The cargo cover panels may not lock in place correctly if this step is not completed exactly.
|
| 2 |
Center Cargo Box Cover
- Remove the center cargo panel by pulling the left and right cargo panel latches.
- Lift the cargo panel up and then out from the side rails.
- The left latch must be locked in place before the right latch. The cargo cover panels may not lock in place correctly if this step is not completed exactly.
|
| 3 |
Front Cargo Box Cover
- Remove the front cargo panel by pulling 2 left and 2 right cargo panel latches.
- Lift the cargo panel up and then out from the side rails.
- The left latches must be locked in place before the right latches. The cargo cover panels may not lock in place correctly if this step is not completed exactly.
|
| 4 |
Rear Cargo Stowage Box |