LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2014 >> Escalade Base, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Exterior Trim >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Cargo Box Stowage and Midgate Window Opening Weatherstrip Replacement >> Removal Procedure

Removal Procedure

  1. Fold down the rear seat.
  2. Remove the rear removable glass panel.
  3. Remove the midgate. Refer to Midgate Replacement .
    4. Fig 1: Push-in Retainer
    GM2235414Courtesy of GENERAL MOTORS COMPANY
  4. Remove the push-in retainer (1).
  5. Starting from one end, remove the weatherstrip from the vehicle.
  6. Clean all mating surfaces for the weatherstrip using a lint-free cloth with Varnish Makers and Painters (VMP) Naptha or a 50/50 mixture, by volume, of isopropyl alcohol and clean drinkable water to remove left over adhesive residue.
scientia non olet · About LEMON Manuals