Instrument Cluster Trim Panel Replacement (Cadillac)
Courtesy of GENERAL MOTORS COMPANY Instrument Cluster Trim Panel Replacement (Cadillac)
| Callout |
Component Name |
|
Preliminary Procedure
- Remove the instrument panel accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement (Cadillac) .
- Remove the left instrrument panel outer air outlet deflector. Refer to Instrument Panel Outer Air Outlet Deflector Replacement - Left Side (Cadillac)
.
|
| 1 |
Instrument Panel Cluster Trim Plate Bezel Procedure
- Position the steering wheel to its lowest possible position.
- Use a flat-bladed plastic trim tool in order to release the retainer clips securing the lower edge of the trim plate to the instrument panel.
- Pull the trim bezel downward, releasing the tabs at the upper edge of the bezel from the instrument panel upper trim panel.
|
| 2 |
Retainer Clips (Qty: 4) |