LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2014 >> ELR >> Repair and Diagnosis >> Electrical >> Wiring Diagrams >> Wiring Systems And Power Management - Inline Harness Connector End Views - X100 To X235 >> Inline Harness Connector End Views >> X190 Engine Harness to Body Harness

X190 Engine Harness to Body Harness

GM2220549
GM2220546
Connector Part Information
  • Harness Type:
  • OEM Connector: 13603186
  • Service Connector: 13576550
  • Description: 40-Way F 1.5, 2.8 Series, Sealed (GY)
Connector Part Information
  • Harness Type:
  • OEM Connector: 13603206
  • Service Connector: 13576553
  • Description: 40-Way M 1.5, 2.8 Series, Sealed (GY)
Terminal Part Information

Terminal Type ID Terminated Lead Diagnostic Test Probe Terminal Removal Tool Service Terminal Tray Core Crimp Insulation Crimp
I Pending Pending Pending Not Available Not Available Not Available Not Available
X190 Engine Harness to Body Harness

Pin Size Color Circuit Terminal Type ID Option Function Pin Size Color Circuit Terminal Type ID Option
1 0.75 RD/VT 3340 I - Battery Positive Voltage 1 0.75 RD/VT 3340 I -
2 0.5 WH/RD 1164 I - Accelerator Pedal Position 5 Volt Reference (1) 2 0.35 WH/RD 1164 I -
3 0.5 YE/WH 1161 I - Accelerator Pedal Position Signal (1) 3 0.35 YE/WH 1161 I -
4 0.5 BK/BU 1271 I - Accelerator Pedal Position Low Reference (1) 4 0.35 BK/BU 1271 I -
5 0.5 BN/RD 1274 I - Accelerator Pedal Position 5 Volt Reference (2) 5 0.35 BN/RD 1274 I -
6 0.5 GN/WH 1162 I - Accelerator Pedal Position Signal (2) 6 0.35 GN/WH 1162 I -
7 0.5 BK/VT 1272 I - Accelerator Pedal Position Low Reference (2) 7 0.35 BK/VT 1272 I -
8 0.5 GN 3726 I - Diurnal Control Valve (DCV) Ground 8 0.5 GN 3726 I -
9 0.5 GY 3723 I - Evap Leak Check Module (ELCM) Changeover Valve Ground 9 0.5 GY 3723 I -
10 0.5 BU 3722 I - Evap Leak Check Module (ELCM) Vacuum Pump Ground 10 0.5 BU 3722 I -
11 0.75 RD/BU 3940 I - Battery Positive Voltage 11 0.75 RD/BU 3940 I -
12 0.5 BU/GN 3725 I - Evap Leak Check Module (ELCM) Pressure Sensor Signal 12 0.5 BU/GN 3725 I -
13 0.5 BN/RD 3724 I - Evap Leak Check Module (ELCM) Pressure Sensor Voltage Reference 13 0.5 BN/RD 3724 I -
14 0.5 VT 5087 I - High Voltage Interlock Loop Signal (1) 14 0.5 VT 5087 I -
15 0.5 VT 5087 I - High Voltage Interlock Loop Signal (1) 15 0.5 VT 5087 I -
16 - - - - - Not Occupied 16 - - - - -
17 0.5 RD/VT 1940 I - Battery Positive Voltage 17 0.5 RD/VT 1940 I -
18 0.5 BU/VT 1589 I - Primary Fuel Level Sensor Signal 18 0.5 BU/VT 1589 I -
19 0.5 BU/WH 890 I - Fuel Tank Pressure Sensor Signal 19 0.5 BU/WH 890 I -
20 0.5 YE/RD 2709 I - Fuel Tank Pressure Sensor 5 Volt Reference 20 0.5 YE/RD 2709 I -
21 0.5 BK/GN 6281 I - Fuel Level Sensor Low Reference 21 0.5 BK/GN 6281 I -
22 0.5 BN/WH 419 I - Check Engine Indicator Control 22 0.35 BN/WH 419 I -
23 0.5 BU/YE 6105 I - High Speed GMLAN Serial Data (+) (2) 23 0.5 BU/YE 6105 I -
24 0.5 WH 6106 I - High Speed GMLAN Serial Data (-) (2) 24 0.5 WH/BU 6106 I -
25 0.5 BU/BK 7493 I - High Speed GMLAN Serial Data (+)(3) 25 0.5 BU/BK 7493 I -
26 0.5 WH 7494 I - High Speed GMLAN Serial Data (-)(3) 26 0.5 WH 7494 I -
27 0.5 GN 6271 I - Crankshaft 60X Sensor Signal 27 0.5 GN 6271 I -
28 0.5 BU/WH 3977 I - Accessory Wakup Serial Data 2 28 0.35 BU/WH 3977 I -
29 0.5 WH/BU 5986 I - Serial Data Communication Enable 29 0.35 WH/BU 5986 I -
30 - - - - - Not Occupied 30 - - - - -
31 0.5 BU/VT 2364 I - Cooling Fan Speed Signal 31 0.5 BU/VT 2364 I -
32 - - - - - Not Occupied 32 - - - - -
33 0.75 RD/WH 2740 I - Battery Positive Voltage 33 0.5 RD/WH 2740 I -
34 0.5 BU/RD 474 I - 5 Volt Reference 34 0.5 BU/RD 474 I -
35 0.5 BU 204 I - A/C Low Pressure Sensor Signal 35 0.5 BU 204 I -
36 0.5 BK/GN 476 I - Sensor Low Reference 36 0.5 BK/GN 476 I -
37-38 - - - - - Not Occupied 37-38 - - - - -
39 0.75 BU 2500 I - High Speed GMLAN Serial Data (+) (1) 39 0.5 BU 2500 I -
40 0.75 WH 2501 I - High Speed GMLAN Serial Data (-) (1) 40 0.5 WH 2501 I -