LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2014 >> CTS Base, 2D Coupe, AWD >> Labor Times >> Other Variant >> Brakes >> Mechanical - Hydraulic >> Brake Shoes &/Or Pads >> Remove & Replace

Brake Shoes &/Or Pads: Remove & Replace

WARNING: This page is about the CTS Base, 4D Sedan, 2.0L Eng VIN X, AWD, which is a different variant/trim than selected.
Includes: Clean, lube and/or replace Brake Hardware as necessary. Adjust Brakes (where applicable). Includes: Repack Wheel Bearings (where applicable). DOES NOT include refinishing.

Applies ToNoteStandard HoursWarranty HoursSkill Level
All1.8B
Front,Both Sides1.0B
Rear,Both Sides1.0B
Combination Procedure: BRAKE HOSE: Replace:
Includes: Bleed System.
Each Additional0.2B
OneIncludes: Perform ABS Automated Bleed procedure.0.7B
Combination Procedure: CALIPER: Overhaul:
Includes: Bleed System.
4D Sedan,In-Line4, Front,One Side,Four Piston Calipers1.6B
4D Sedan,In-Line4, Rear,One Side,Single Piston Calipers1.0B
Combination Procedure: CALIPER: Replace:
Includes: Bleed System.
OneIncludes: Perform ABS Automated Bleed procedure.0.8B
Combination Procedure: DISC ROTOR: Burnish Brake Rotors While Driving Vehicle:
0.5B
Combination Procedure: DISC ROTOR: Correct:
Lateral Runout,EachCorrect Rotor lateral runout by indexing or correction plate.0.2B
Combination Procedure: WHEEL BEARING: Replace:
Includes: Repack Wheel Bearings (where applicable).
AWD, Front,One Side0.7B
Rear,One Side0.7B