Steering Wheel Airbag Coil Replacement
Courtesy of GENERAL MOTORS COMPANY Steering Wheel Airbag Coil Replacement
| Callout |
Component Name |
|
Preliminary Procedures
- Remove the steering wheel. Refer to Steering Wheel Replacement
.
- Remove the steering column shroud. Refer to Steering Column Shroud Replacement
.
|
| 1 |
Inflatable Restraint Steering Wheel Module Coil Bolt (Qty: 4) Tighten 3 N.m (27 lb in) |
| 2 |
Inflatable Restraint Steering Wheel Module Coil Procedure
- Disconnect any electrical connectors as necessary.
- Transfer the steering angle sensor. Refer to Steering Angle Sensor Replacement
.
- Ensure the coil is centered during installation. If you are installing a NEW coil, remove the centering tab AFTER the coil is on the steering column. Refer to Airbag Steering Wheel Module Coil Centering .
|