LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Hybrid, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Engine Mechanical - 5.3L, 6.0L, 6.2L - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Air Conditioning Compressor Belt Replacement (V8) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Removing Belt
    GM1987654Courtesy of GENERAL MOTORS COMPANY
  1. Remove the accessory drive belt. Refer to Drive Belt Replacement - Accessory .
  2. Remove the skid plate. Refer to Engine Shield Replacement .
  3. Cut the belt (1) from air conditioning (A/C) and crankshaft pulleys.
scientia non olet · About LEMON Manuals