LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Hybrid, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Antilock Brake System - Non-Hybrid Less Than 3900 Kg (8600 Lb) GVW) >> Repair Instructions >> Electronic Traction Control Switch Replacement

Electronic Traction Control Switch Replacement

WARNING: This page is about a different variant/trim than selected.
Fig 1: View Of Rear Object Alarm Module Switch Assembly
GM1703994Courtesy of GENERAL MOTORS COMPANY
Electronic Traction Control Switch Replacement

Callout Component Name
Preliminary Procedure 
Remove the instrument panel (I/P) accessory trim panel. Refer to Instrument Panel Accessory Trim Plate Replacement (Except Cadillac) , Instrument Panel Accessory Trim Plate Replacement (Cadillac) .
1 Traction Control Switch
  • Disconnect the electrical connector.
  • Use a small pocket screwdriver to release the locking tabs on the switch.