LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Hybrid, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Antilock Brake System - Non-Hybrid Less Than 3900 Kg (8600 Lb) GVW) >> Diagnostic Information and Procedures >> DTC C0161 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different variant/trim than selected.
NOTE:

If the ABS, and/or Traction Control indicators are ON with DTC C0161.00 set in history, perform the conditions for clearing the DTC and inform the customer that two footed driving set this DTC.

  1. Ignition ON.
  2. Verify the stop lamps turn ON and OFF while pressing and releasing the brake pedal.
    • If the stop lamps turn ON and OFF 
  3. Refer to diagnostic aids .