LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Hybrid, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Antilock Brake System - Non-Hybrid Less Than 3900 Kg (8600 Lb) GVW) >> Diagnostic Information and Procedures >> DTC C0161 >> Circuit/System Description

Circuit/System Description

WARNING: This page is about a different variant/trim than selected.

The electronic brake control module (EBCM) monitors the brake pressure sensor voltage, vehicle speed, and a serial data message from the body control module (BCM) that the brake pedal is either applied or released. When the vehicle is stopping the EBCM detects the brake pressure sensor voltage increases and correlates the readings to the serial data message from the BCM that the brake pedal is applied, and the vehicle is slowing down, or when the vehicle is accelerating, the brake pedal is released and brake pressure sensor voltage returns to 0 volts.

scientia non olet · About LEMON Manuals