No Torque Converter Clutch Apply
WARNING: This page is about a different variant/trim than selected.
No Torque Converter Clutch Apply
| Checks | Causes |
|---|---|
| Torque Converter Assembly (1) | Diagnose torque converter for possible internal damage. Refer to Torque Converter Diagnosis . |
| Fluid Pump Cover Assembly (219) |
|
| Control Valve Lower Body Assembly (307) | Inspect for worn, damaged, or sticking torque converter clutch (TCC) regulator apply valve (355). Refer to Control Solenoid Valve and Transmission Control Module Assembly Inspection . |
| 4-5-6 (with Turbine Shaft) Clutch Assembly (56) |
|
| Torque Converter (with Fluid Pump) Housing Assembly (2) | Inspect for leaking or damaged torque converter fluid seal assembly (201), torque converter bushing (206), turbine shaft o-ring seal (443) and torque converter (with fluid pump) housing assembly (2). |