LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Hybrid, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Automatic Transmission - 6L80/6L90 - Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> Harsh Torque Converter Clutch Apply, or Inoperative or No Electronically Controlled Capacity Clutch Control

Harsh Torque Converter Clutch Apply, or Inoperative or No Electronically Controlled Capacity Clutch Control

WARNING: This page is about a different variant/trim than selected.
Harsh Torque Converter Clutch Apply, or Inoperative or No Electronically Controlled Capacity Clutch Control

Checks Causes
NOTE:

On cold days, approximately 32°F (0°C) or colder, the transmission is designed to shift differently. The transmission uses a warm-up mode shift schedule until the engine reaches normal operating temperature. While the transmission is in warm-up mode, it is normal for transmission upshifts to be delayed or held longer. This feature improves heater performance by giving quicker vehicle warm-ups.
Torque Converter Assembly (1)
  • Inspect for leaking or damaged torque converter clutch hub seal.
  • Diagnose torque converter assembly for possible internal damage. Refer to Torque Converter Diagnosis .
Clutch Select Solenoid Valve Spring (353) Inspect for broken spring within the lower valve body in the torque converter clutch regulator apply valve line up (355).
scientia non olet · About LEMON Manuals