LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Hybrid, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Automatic Transmission - 6L80/6L90 - Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> DTC P2762, P2763, or P2764 >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page is about a different variant/trim than selected.

P2762 

The Transmission Control Module detects an internal electrical performance malfunction of the TCC pressure control solenoid control circuit where the measured TCC pressure control solenoid current does not equal the commanded TCC pressure control solenoid current for 5 s.

P2763 

The Transmission Control Module detects an open/high resistance or short to voltage on the TCC pressure control solenoid control circuit for 5 s.

P2764 

The Transmission Control Module detects a short to ground on the TCC pressure control solenoid control circuit for 1 min.