Conditions for Setting the DTC
WARNING: This page is about a different variant/trim than selected.
P2728
The Transmission Control Module detects an internal electrical performance malfunction of the clutch pressure control solenoid valve 5 control circuit where the measured clutch pressure control solenoid valve 5 current does not equal the commanded clutch pressure control solenoid valve 5 current for 5 s.
P2729
The Transmission Control Module detects a short to ground on the clutch pressure control solenoid valve 5 control circuit for 1 s.
P2730
The Transmission Control Module detects an open or short to voltage on the clutch pressure control solenoid valve 5 control circuit for 1 s.