Conditions for Running the DTC

P2723

• DTC P0101, P0102, P0103, P0106, P0107, P0108, P0171, P0172, P0174, P0175, P0201, P0202, P0203, P0204, P0205, P0206, P0207, P0208, P0300, P0301, P0302, P0303, P0304, P0305, P0306, P0401, P042E, P0716, P0717, P0722, P0723, or P182E is not set.
• The ignition voltage is between 8.6-32 V.
• The engine speed is between 400-7,500 RPM for 5 s.
• The transmission temperature is -6.6°C (20.12°F) or greater.
• The throttle position signal is valid.
• High side driver is enabled.
• The transmission output speed sensor signal is 67 RPM or greater or the accelerator pedal position sensor signal is 0.5 percent or greater.

P2724

• DTC P0101, P0102, P0103, P0106, P0107, P0108, P0171, P0172, P0174, P0175, P0201, P0202, P0203, P0204, P0205, P0206, P0207, P0208, P0300, P0301, P0302, P0303, P0304, P0305, P0306, P0401, P042E, P0716, P0717, P0722, P0723, or P182E is not set.
• The ignition voltage is between 8.6-32 V.
• The engine speed is between 400-7,500 RPM for 5 s.
• The transmission temperature is -6.6°C (20.12°F) or greater.
• The throttle position signal is valid.
• High side driver is enabled.
• The transmission output speed sensor signal is 67 RPM or greater or the accelerator pedal position sensor signal is 0.5 percent or greater.